Epson BX925FWD Ink Pad Counter Reset Guide

Epson BX925FWD Waste Ink Counter Reset

When the Epson BX925FWD reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson BX925FWD accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson BX925FWD Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson BX925FWD waste counter reset in minutes.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Reset Epson BX925FWD Waste Ink Counter in 3 Steps

  1. Step 1: Prepare a Windows PC + USB cable and connect Epson BX925FWD directly. Keep Internet enabled for validation.
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson BX925FWD.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson BX925FWD.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson BX925FWD waste counter resets finish in ~1–2 minutes.

If the Printer Is Not Detected

  • Use a direct USB connection (avoid hubs).
  • Restart printer and PC, then try again.
  • Close Epson Status Monitor or other printer utilities.
  • Try another USB cable (some cables are charge-only).
  • Run the app as Administrator.

FAQ

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson BX925FWD – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart