Epson Artisan 837 Waste Ink Counter Reset

The Epson Artisan 837 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson Artisan 837 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson Artisan 837 Show ‘Service Required’?

Most Epson Artisan 837 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Epson Artisan 837 Ink Pad Counter Reset – Quick Steps

1. Step 1: Prepare a Windows PC + USB cable and connect Epson Artisan 837 directly. Keep Internet enabled for validation.
2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson Artisan 837.
3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson Artisan 837.

Most Epson Artisan 837 waste counter resets finish in ~1–2 minutes.

System Requirements

• USB connection required (Wi-Fi reset not supported)
• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC
• Stable Internet connection during reset

If the Printer Is Not Detected

• Use a direct USB connection (avoid hubs).
• Run the app as Administrator.
• Close Epson Status Monitor or other printer utilities.
• Try another USB cable (some cables are charge-only).
• Temporarily disable VPN/proxy if validation fails.

Frequently Asked Questions