Reset Epson XP-345 Waste Ink Counter in Minutes

Epson XP-345 Waste Ink Counter Reset

The Epson XP-345 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson XP-345 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson XP-345 Ink Pad Counter Warning?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson XP-345 waste counter reset in minutes.

Step-by-Step: Epson XP-345 Waste Counter Reset

  1. Trin 1: Prepare a Windows PC + USB cable and connect Epson XP-345 directly. Keep Internet enabled for validation.
  2. Trin 2: Start Wic Reset Connect in Administrator mode and wait until Epson XP-345 appears in the device list.
  3. Trin 3: Paste the reset key, click Reset, and after completion power-cycle Epson XP-345.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruktioner

Most Epson XP-345 waste counter resets finish in ~1–2 minutes.

What You Need

  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key

If the Printer Is Not Detected

  • Run the app as Administrator.
  • Temporarily disable VPN/proxy if validation fails.
  • Try another USB cable (some cables are charge-only).
  • Restart printer and PC, then try again.
  • Use a direct USB connection (avoid hubs).

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson XP-345 – Waste Ink Counter Reset using Wic Reset Connect.

Indkøbskurv