Epson XP-2205 Ink Pad Counter Reset Guide

Epson XP-2205 Waste Ink Counter Reset

If your Epson XP-2205 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson XP-2205 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson XP-2205 Ink Pad Counter Warning?

Most Epson XP-2205 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Three Steps to Restore Epson XP-2205 Printing

  1. Trin 1: Connect Epson XP-2205 to a Windows computer with a stable Internet connection using a USB cable.
  2. Trin 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-2205.
  3. Trin 3: Paste the reset key, click Reset, and after completion power-cycle Epson XP-2205.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruktioner

Most Epson XP-2205 waste counter resets finish in ~1–2 minutes.

FAQ

How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson XP-2205 – Waste Ink Counter Reset using Wic Reset Connect.

Indkøbskurv