Fix Epson R1900 Service Required – Waste Counter Reset

Epson R1900 Waste Ink Counter Reset

The Epson R1900 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson R1900 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson R1900 Stops Printing (Waste Counter Limit)

Most Epson R1900 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Reset Epson R1900 Waste Ink Counter in 3 Steps

  1. Trin 1: Prepare a Windows PC + USB cable and connect Epson R1900 directly. Keep Internet enabled for validation.
  2. Trin 2: Start Wic Reset Connect in Administrator mode and wait until Epson R1900 appears in the device list.
  3. Trin 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson R1900.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruktioner

Most Epson R1900 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)

Common Fixes

  • Try another USB cable (some cables are charge-only).
  • Run the app as Administrator.
  • Temporarily disable VPN/proxy if validation fails.
  • Restart printer and PC, then try again.
  • Use a direct USB connection (avoid hubs).

Frequently Asked Questions

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson R1900 – Waste Ink Counter Reset using Wic Reset Connect.

Indkøbskurv