Epson PX-601F Waste Ink Counter Reset

The Epson PX-601F delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson PX-601F accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson PX-601F Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson PX-601F waste counter reset in minutes.

Common Symptoms

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Step-by-Step: Epson PX-601F Waste Counter Reset

1. Trin 1: Use a Windows PC (7–11) with Internet access. Connect Epson PX-601F via USB (Wi-Fi reset is not supported).
2. Trin 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson PX-601F.
3. Trin 3: Use the key to reset the counter, wait for completion, then restart Epson PX-601F to finalize.

Most Epson PX-601F waste counter resets finish in ~1–2 minutes.

System Requirements

• Windows 7/8/10/11 PC
• Valid Wic Reset Connect reset key
• USB connection required (Wi-Fi reset not supported)
• Stable Internet connection during reset

Troubleshooting

• Temporarily disable VPN/proxy if validation fails.
• Use a direct USB connection (avoid hubs).
• Run the app as Administrator.
• Restart printer and PC, then try again.
• Try another USB cable (some cables are charge-only).

FAQ