How to Reset Epson L3119 Waste Ink Counter

Epson L3119 Waste Ink Counter Reset

The Epson L3119 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson L3119 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson L3119 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson L3119 waste counter reset in minutes.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson L3119 Ink Pad Counter Reset – Quick Steps

  1. Trin 1: Connect Epson L3119 to a Windows computer with a stable Internet connection using a USB cable.
  2. Trin 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson L3119.
  3. Trin 3: Use the key to reset the counter, wait for completion, then restart Epson L3119 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruktioner

Most Epson L3119 waste counter resets finish in ~1–2 minutes.

Troubleshooting

  • Close Epson Status Monitor or other printer utilities.
  • Use a direct USB connection (avoid hubs).
  • Run the app as Administrator.
  • Try another USB cable (some cables are charge-only).
  • Restart printer and PC, then try again.

FAQ

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson L3119 – Waste Ink Counter Reset using Wic Reset Connect.

Indkøbskurv