Epson ET-2805 Waste Ink Counter Reset

The Epson ET-2805 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson ET-2805 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson ET-2805 Show ‘Service Required’?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson ET-2805 waste counter reset in minutes.

Common Symptoms

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Reset Epson ET-2805 Waste Ink Counter in 3 Steps

1. Trin 1: Connect Epson ET-2805 to a Windows computer with a stable Internet connection using a USB cable.
2. Trin 2: Run Wic Reset Connect as Administrator and confirm Epson ET-2805 is detected.
3. Trin 3: Paste the reset key, click Reset, and after completion power-cycle Epson ET-2805.

Most Epson ET-2805 waste counter resets finish in ~1–2 minutes.

System Requirements

• Windows 7/8/10/11 PC
• USB connection required (Wi-Fi reset not supported)
• Stable Internet connection during reset
• Valid Wic Reset Connect reset key

If the Printer Is Not Detected

• Run the app as Administrator.
• Use a direct USB connection (avoid hubs).
• Try another USB cable (some cables are charge-only).
• Restart printer and PC, then try again.
• Close Epson Status Monitor or other printer utilities.