Epson EP-775AW Waste Ink Counter Reset
The Epson EP-775AW is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.
The Epson EP-775AW tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
Why Does the Epson EP-775AW Show ‘Service Required’?
Most Epson EP-775AW waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.
Typical Signs
- ‘Service Required’ / service life message in driver or utility
- Maintenance/support code (varies by model/driver)
- Printing stops after cleaning cycles
- Warning repeats after restarting the printer
Epson EP-775AW Ink Pad Counter Reset – Quick Steps
- Trin 1: Use a Windows PC (7–11) with Internet access. Connect Epson EP-775AW via USB (Wi-Fi reset is not supported).
- Trin 2: Run Wic Reset Connect as Administrator and confirm Epson EP-775AW is detected.
- Trin 3: Paste the reset key, click Reset, and after completion power-cycle Epson EP-775AW.
Most Epson EP-775AW waste counter resets finish in ~1–2 minutes.
Frequently Asked Questions
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Guide prepared for Epson EP-775AW – Waste Ink Counter Reset using Wic Reset Connect.