Epson BX625FWD Waste Ink Counter Reset

The Epson BX625FWD is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson BX625FWD uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson BX625FWD Ink Pad Counter Warning?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson BX625FWD waste counter reset in minutes.

Common Symptoms

‘Service Required’ / service life message in driver or utility
Maintenance/support code (varies by model/driver)
Printing stops after cleaning cycles
Warning repeats after restarting the printer

Three Steps to Restore Epson BX625FWD Printing

Trin 1: Connect Epson BX625FWD to a Windows computer with a stable Internet connection using a USB cable.
Trin 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson BX625FWD.
Trin 3: Paste the reset key, click Reset, and after completion power-cycle Epson BX625FWD.

Buy Reset Key ⬇️ Download Wic Reset Connect Instruktioner

Most Epson BX625FWD waste counter resets finish in ~1–2 minutes.

Troubleshooting

Run the app as Administrator.
Close Epson Status Monitor or other printer utilities.
Use a direct USB connection (avoid hubs).
Restart printer and PC, then try again.
Try another USB cable (some cables are charge-only).

Frequently Asked Questions

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

How long does it take?

Usually about 1–2 minutes.

Guide prepared for Epson BX625FWD – Waste Ink Counter Reset using Wic Reset Connect.