Epson EP-805AW Waste Ink Counter Reset

When the Epson EP-805AW reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson EP-805AW uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson EP-805AW Stops Printing (Waste Counter Limit)

Most Epson EP-805AW waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Step-by-Step: Epson EP-805AW Waste Counter Reset

1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson EP-805AW via USB (Wi-Fi reset is not supported).
2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson EP-805AW is detected.
3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson EP-805AW to finalize.

Most Epson EP-805AW waste counter resets finish in ~1–2 minutes.

Before You Begin

• USB connection required (Wi-Fi reset not supported)
• Stable Internet connection during reset
• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC

Troubleshooting

• Run the app as Administrator.
• Close Epson Status Monitor or other printer utilities.
• Restart printer and PC, then try again.
• Try another USB cable (some cables are charge-only).
• Use a direct USB connection (avoid hubs).